To start with you should first understand the differences between the USPS andCanada Post mailing address formats. Both these postal organizations have their set of addressing guidelines and tips.
Understanding how to read Canadian addresses can help you get your mail delivered to the right person and on time. Make sure to verify your details before you continue mailing internationally.
In this article, we will walk you through the different types of Canada Post address formats. Also, we will cover how to write Canadian addressesand send your mail.
Keep reading!
Like US addresses, a Canadian postal address should have at least three lines to make them deliverable. If your address does not have three lines, you probably don’t have the complete details. Or there are chances that you are using the wrong format.
Mentioned below are a few components to include when writing Canadian mailing addresses:
Recipient’s Name
Write the recipient’s full name in capital letters on the first line. Use a suitable prefix, such as “Mr.,” “Ms.,” “Mrs.,” “Dr.,” etc., followed by the name. It is mandatory to mention the recipient’s name on the first line unless you are mailing a business. In this case, you can write the company name instead.
Moreover, it is better to write the concerned recipient’s name even while writing business addresses—so that you can direct the mail to the right person within a company.
For example, you want to mail a person named Mr. William, who is the HR head of XYZ company which has 50 employees. If you skip writing his name on the first line, your mailpiece might reach the wrong recipient within the firm.
Hence, be upfront and write the recipient’s full and correct name to begin your address. Again, like US addresses, you can start writing in the middle of the envelope.
Additional Address Details
You can add an extra line to your mailing address if there is something that you wish to add. Sometimes, you may need to include the department name within an organization, like the sales and marketing department, purchase department, etc.
Also, you can add the person’s designation as additional address details. All this information makes the delivery process more precise.
Take care to add theseextra details on the second line—below the recipient’s name. Also, you should include this line only when it is needed or necessary.
Civic AddressIn the US, we mention the street address on the second line. It carries the apartment or unit number along with the street name.
Similarly, theCanada address formatrequires you to mention the civic address on the third line. If you don’t add any secondary address details, write the civic address on the second line.
Remember that there are several street types like alleys, avenues, parkways, drives, etc. They all have an abbreviation that you must use in your civic addresses.
Find below some examples:
Street Types | Abbreviations |
Boulevard | BLVD |
Center | CTR |
Range | RG |
Orchard | ORCH |
Expressway | EXPY |
Road | RD |
Street | ST |
Passage | PASS |
Highway | HWY |
Point | PT |
Avenue | AVE |
Crossing | CROSS |
Plateau | PLAT |
Mountain | MTN |
Line | LINE |
Turnabout | TRNABT |
Meadow | MEADOW |
Grounds | GRNDS |
Route | RT |
Townline | TLINE |
Harbor | HARBR |
*The above list is not exhaustive.
You should also mention the correct street directions, like N, S, E, W, NW, SE, SW, NE, etc. If you want to mention the apartment or suite number, you can use the following abbreviations:
- Apartment: APT
- Unit: UNIT
- Suite: SUITE
You can follow the following Canada street address formats:
- 101 JASPER AVE SW
- 25-108 CEDAR ST
- SUITE 5 BIRCHMOUNT RD
Municipality Name and Province or Territory
The following line should consist of the city or municipality name. However, a single city may have more than one municipality functioning in the area.
Canada has a total of3,573municipalities. So, be sure to write the correct name.
Leave a space after the city name and write the province or territory where your address belongs. Write their abbreviations instead of the name—exactly like US addresses.
Here’s the list of all provinces and territories in Canada with their 2-digit abbreviations:
Province or Territory Name | Abbreviation |
Alberta | AB |
New Brunswick | NB |
British Columbia | BC |
Nova Scotia | NS |
Prince Edward Island | PE |
Saskatchewan | SK |
Manitoba | MB |
Quebec | QC |
Newfoundland and Labrador | NL |
Yukon | YT |
Nunavut | NU |
Ontario | ON |
Postal Codes
Before we continue discussing how to format Canadian addresses, let us talk about Canadian postal codes. The mailing address format Canadaneeds you to write the postal code on the same line as the city and province.
You need to leave two spaces after the province abbreviation before writing your postal codes. Unlike theZIP codesin the US,postal codesare alphanumeric and have six digits. Postal codes follow the format ANA NAN, wherein A is an alphabet and N is a number.
They are divided into two broad segments: Forward Sortation Area (FSA) and Local Delivery Unit (LDU). The FSA defines a major geographical location, whereas the LDU identifies small delivery units.
Find below an example for better reference:
Every province and territory has a code letter that makes the first character of the FSAs. Here’s a list of these code letters:
Geographic Area | First Character of FSA |
Newfoundland and Labrador | A |
Nova Scotia | B |
Prince Edward Island | C |
New Brunswick | E |
Eastern Quebec | G |
Metropolitan Montreal | H |
Western Quebec | J |
Eastern Ontario | K |
Central Ontario | L |
Metropolitan Toronto | M |
Southwestern Ontario | N |
Northern Ontario | P |
Manitoba | R |
Saskatchewan | S |
Alberta | T |
British Columbia | V |
Northwest Territories/Nunavut | X |
Yukon | Y |
In the above example- M4B 1G5, it is clear that the mail is going to Metropolitan Toronto. Similarly, the other characters also help postal services deliver your mail to the exact destination.
So, the whole line should look something like this:
MONTRÉAL QC H1A 0B7
Country Name
If you send your mail from Canada to a Canadian address, you need not write the country name. But, you should always write the destination country’s name forinternational mailing.
While using theCanada mailing address format from the US, you should write the word “CANADA” on the last line.
It doesn’t matter how many lines you use in yourUSPS Canada address format, mention the country name at the end.
Here’s aCanada address exampleto help you understand better:
MR KEVIN DIAS
978 ARGYLE ST N
HALIFAX NS B3J 2B3
CANADA
If you don’t know the correct postal code or province, you can check the Canada Post website. But, you may or may not get the details you are looking for to write thecorrect mailing address.
Hence, PostGrid’s USPS andCanada Post address lookuphelps you verify any address you want.
Also Read:UK Mailing Address Format
Tips to Write Effective Letters
Here are some helpful tips businesses can use to write letters:
Add a Proper Introduction and Conclusion
The letter must have different and straightforward paragraphs. Add an introductory section in the beginning, discussing the letter’s motive. Make it short and precise.
The body should consist of all the details. Avoid adding the most crucial information in the first or second line.
You can add more paragraphs to provide more information, but keep the flow consistent.
Then, add a conclusion and closing to inform readers you want them to complete the CTA after reading the letter. Please don’t forget to include the valid contact details where people connect with you.
Be Consistent
Writing letters should be a natural process. Please don’t add unnecessary information or try to make it lengthy.
You should be consistent with your thoughts and ideas. Organize what you want to say in your letters and draft them accordingly.
Ensure your letter has an upfront message that readers can remember and act upon.
Address the Reader By Their First Name
It is always an excellent idea to address people by their first name. It makes them feel special and helps grab their attention.
Keep It Concise
Your reader might have a busy schedule and only get a little time to read your correspondence. Thus, keep it short and to the point. Express your primary objective in the first few sentences.
It lets people focus more on the details and know what to do next. Also, it shows that you respect their time and don’t want to spam them with unnecessary messages and information.
An excellent method is to use one-pager letters. It is short and helps people skim the message in only a few seconds.
The upcoming method is to use bullet points to divide different sections. It enhances your message’s readability and helps readers remember what you want to convey.
Proofread Your Letters
Cross-check whether your letters have spelling errors, typos, spacing, and other problems. You can ask your colleagues to proofread them and provide opinions on improving the messages.
Also, check the grammar to ensure a professional look. It helps your recipients think of your brand as reputed and authentic.
Establish Personal Connections
You can create personal bonds via business letters. Though formal, these messages are excellent for growing your network and expanding your brand.
Ask the reader about their whereabouts if you know them personally. Otherwise, you can talk using your brand’s perspective and create personal connections.
Avoid Complicated Language
Adding jargon or unusual words can make your letter unprofessional and messy. Hence, use everyday language that readers understand.
Also, help recipients understand what to do next.
Consider the Formatting
Formatting the letter the correct way can help make an excellent impression. Hence, please use one font throughout the message and keep the layout the same for all pages.
Also, please focus on the headings, primarily if you use bullet points or similar sections.
Send Letters Via Reliable Services
Sending letters via First-Class Mail allows you to ensure they reach the recipients on time. It is the most affordable and convenient way to send formal correspondence.
Also, Priority Mail is best for sending urgent messages, like contracts or checks with attached letters.
Also Read: How to Write a Letter to a PO Box
Now that you knowhow to address a letter to Canada, you should be aware of some other addressing guidelines.
Below are some tips that can help you address your items correctly:
- Write using uppercase or block letters.
- Avoid using the # sign. Instead, you can use a hyphen wherever needed—like between the apartment and street number.
- Use the correct abbreviations as discussed above. Never write the full name of provinces and territories because it can lead to delivery failures.
- Separate both parts of the postal codes with a space. In this case, refrain from using a hyphen.
- Thestandard address format Canadasuggests leaving at least 0.6 mm or 15 inches of space on every side of the envelope.
- You can leave a maximum of 35 mm between the top of the envelope and the mailing address. Plus, take care to leave at least 10 mm on all the other sides of the label or envelope.
Find below the image of a standard envelope to help you understand better:
- On large envelopes, leave a minimum of 50 mm from the bottom of the envelope.
- If you want to insert your logo or other graphics on the face of your envelopes, place it towards the left of your mailing address.
- Try to print addresses rather than write them as you can avoid any potential handwriting misinterpretation.
It is crucial to use thecorrect Canada address formatas the addresses are read by automated sorting equipment.
If the address does not fit the standard format, it can lead to several delivery issues.
Also Read: What Is A Non-standard Address?
How To Obtain the Canadian Postal Code Information
Senders that want to order a Postal Code Directory for Canadian mailings can write to this address to get the order form:
Attn: NATIONAL PHILATELIC CENTRE
CANADA POST CORPORATION
75 ST NINIAN ST SUITE 100
ANTIGONISH NS B2G 2R8
CANADA
You can also call on: 800–565–4362
Large-volume or frequent shippers that require Canadian postal code information or details about Canadian mailing standards must write to:
Attn: ADDRESS MANAGEMENT
CANADA POST CORPORATION
2701 RIVERSIDE DR SUITE NO813
OTTAWA ON K1A 0B1
CANADA
They can also call 800–260–7678
Readability of Your Canada Postal Address Format
USPS defines automation-readable items as mailers with accurate, valid, and correctly formatted addresses. It also considers whether the package or envelope has an Intelligent Mail barcode or ZIP+4 code.
Another crucial thing is whether it is readable on an OCR sorter or barcode. The Intelligent Mail barcode or IMB should reflect these ZIP+4 Codes, irrespective of whether senders pre-apply or print it using the OCR. It facilitates the highest sorting techniques for all mail items.
Here is an illustration:
Senders can typewrite postal addresses or use machine printing. Use dark ink on a lighter background, like white or sky blue.
Also, it is best to use uppercase letters to avoid confusion.
Please avoid using punctuation. You can add the hyphen in the address’s primary or secondary street number or within the ZIP+4 Code.
Format all address lines with a consistent left-sided margin. Add the country’s name in uppercase on the last line whenever you draft foreign addresses.
Address characters cannot touch each other, and senders must ensure equal spaces between them. All address lines must be parallel to the envelope’s bottom.
Please include all crucial details, like the apartment, suite, and floor numbers, with the directional codes.
Place an imaginary rectangle surrounding the entire address—the OCR read area. It extends from ⅝” to 2 ¾” from the item’s bottom with ½” margins on every mailpiece side.
The barcode clear area extends from ⅝” from the bottom. It goes up to 4 ¾” from the item’s right edge, where you can pre-apply an Intelligent Mail barcode (IMB) or print it using the OCR technology.
The irrelevant (non-address) printing you might notice in the OCR read area should appear above the delivery address line. It should be the farthest from the address block to avoid confusion or misinterpretation.
Also Read: Business Address Validation
There are several different types of Canadian addresses. Hence, there are also many differentCanada Post standard address formats. Find them below:
Civic Addresses
The most common type of Canadian address is a civic address. You can add the recipient’s name on the first line and civic address on the second line.
Write the city, province, territory, and postal code on the third line. Then, mention “Canada” in the last line, and you are good to go.
If you need to mention any extra address details, you can write them below the recipient’s name.
Here’s an example of aToronto Canada address format:
RACHAEL LEFEBVRE
HR DEPARTMENT
87 DANFORTH AVE
TORONTO ON M4K 1M8
Civic Addresses in Rural Areas
Most rural areas in Canada also use civic addresses with rural postal codes. Find below an example:
ARIA BOUCHARD
4 FIRST AVE S
BIG VALLEY AB T0L 1K0
Postal Box Address
PO box addresses are a little different than civic addresses. Instead of writing the street address, you need to write the Post Office box number.
- Start your PO box address as usual with the recipient’s name.
- On the second line, write the postal box number and station information.
- The third line can be written in the same way as well- mention the municipality name, province or territory, and postal code.
Below is an example of theCanada Post PO box address format:
AUSTIN ADAMS
PO BOX 4600 STN B
COURTENAY BC V9N 0A7
However, you may add the civic address line as well. But, this line should always be above the PO box address line as the sorting equipment reads the addresses from the downside up.
Rural Route Addresses
You may askhow to format addresses in Canadawith rural route identifiers.
Rural route addresses have the rural route identifier and the station information on the second line. The remaining lines can be written in the same way.
Find below an example:
HANNAH JOSEPH
RR 6 LCD MAIN
IQALUIT NU X0A 0A1
General Delivery Addresses
Thefull address format Canadafor general delivery addresses consists of:
- Recipient’s name
- The station information and general delivery identifier
- City, province, and postal code.
Below is an example for your reference:
AMY GILLIES
GD STN P
CALGARY AB T1X 1G4
Military Addresses
Below are all the components that you should include while writing military addresses:
- On the first line, write the rank, initials, and full name of the recipient.
- Then write the mess or section number.
- Mention the name of the unit, operation, or ship on the third line.
- Write the PO box number along with “STN FORCES.”
- On the last line, write the city, province, territory, and postal code.
Here is an example:
MS MILEY BROWN
MESS #19
HMCS CALGARY
PO BOX 5048 STN FORCES
VICTORIA BC V8P3R2
If you want to write bilingual addresses, simply add a black vertical line separating the two of them. Other address placement guidelines should remain the same.
Also Read: How Canada Postal Services Work?
Above, we discussed how to address an envelope going to Canada. But, you should also know about the different options that the USPS offers to send something to Canadian addresses.
You can use the following USPS services to mail to Canada:
- Global Express Guaranteed
- Priority Mail International Canada
- Priority Mail Express International
- Airmail M-Bags
- First-Class Mail International
- First-Class Package International
The postage forstandard-sized postcardsand letters begins at $1.30. You can useFirst-Class Mail Internationalto send letters weighing up to 3.5 ounces.
If you mail to Canadian addresses frequently, you should consider buyingGlobal Forever stamps. These stamps never expire, so you can send mail to international locations at any time without worrying about the changes inCanada’s postal rates.
Typically, deliveries to Canadian mailing addresses take about four to seven business days. But, it depends on which mailing class you select.
If you need to send something urgent, you can select Priority Mail Express International. But, it can take up to 20 business days for your mail to arrive if you choose options like First-Class Package International.
You need not go to the Post Office to send an envelope or parcel to Canada. The Canada Post website has an online customs form that you can fill out. Plus, you can buy packaging items and stamps online.
Avoid sending items that exceed the weight and size dimensions as prescribed by Canada Post to save on surcharges. Also, use the correctCanada address format internationalto avoid unnecessary trouble like lost or returned mail.
The best way to prevent such issues is to usePostGrid’saddress verification API. It can help you verify your mailing addresses in advance so that you can mail confidently.
Furthermore, PostGrid also standardizes all addresses so that they are formatted properly.
Also Read: Postal Address Example
We hope that this blog can help you understandhow to mail a letter to Canada. By following the correct formats, you can ensure that your items arrive on time.PostGridcan assist you in the process and make your work a lot more cost-effective, speedy, and efficient.
Want to verify your Canada mailing addressesin advance to save yourself from future hassles?Sign upnow to get in touch!